AGS Stellantriebe GmbH - Valves, actuators and control technology from Schloß Holte-Stukenbrock
HOTLINE: +49 (0) 5207 - 99384-0 Your partner for valves, actuators and control technology
 
Pneumatic actuator PAG

Pneumatic actuator PAG

  • Drehmoment: Single-acting: 5 - 1800Nm
  • Drehmoment zusatz: Double-acting: 5 - 4800Nm
  • Stellwege: 90°, 120°, 180°
  • Umg.-Temp.: -50°C to +70°C (basic)
  • Umg.-Temp. Sonder: -15°C - +160°C (special), -30°C - +200°C (special)
  • Schnittstelle: ISO 5211, Namur VDI/VDE 3845
  • Data sheet

The pneumatic part-turn actuators of the PAG series are suitable for a wide range of applications. The pneumatic actuators have proven their worth for years in a wide variety of industries, such as mechanical engineering, the steel industry or the glass industry. As a common application, the actuators of the PAG series are used as actuators for butterfly valves or shut-off dampers.

The pneumatic actuators are available in both single-acting and double-acting versions for swing angles of 90°, 120° and 180°. Special swivel angles can be provided on request. Fine adjustment of the end positions is possible. Depending on the pilot air pressure, torques of up to 4800Nm at 6bar and double-acting version or 1872Nm at 6bar and single-acting version are possible. The maximum permissible pilot air pressure for the actuators is 10bar.

As a universal, compact industrial version, the pneumatic actuators are approved for use in ambient temperatures of -50°C to +70°C. As a special version, there is the possibility for releases of up to +160°C.

The pneumatic quarter-turn actuators have an internal octagonal shaft as standard. By means of adapters or couplings, it is possible to adapt the actuators according to the specifications. In addition to the standard mounting holes in the actuator, other hole circles can be made possible by using mounting brackets.

A wide variety of options such as different solenoid valves, limit switch boxes, positioners and throttle silencers allow the actuators to be adapted exactly to your needs. Various mounting parts and accessories underline the flexibility of the part-turn actuators.

Are you interested in or do you have any questions about the pneumatic part-turn actuators of the PAG series? We look forward to your enquiry and will be happy to advise you!


Optionen

Magnetventile

Magnetventile

 Ausf.: 3/2-Wege-, 5/2-Wege- und 5/3-Wege
Spannungen: 24VDC oder 230VAC
Anschluß G 1/4", Lochbild nach Namur

Zu den Optionen

Signalbox

Signalbox
Standard: 2 Mikroschalter
Sonder: 4 Mikroschalter
Sonder: 2 Initiatoren
Zu den Optionen

Stellungsregler

Stellungsregler

Betriebsspannung: 24VDC
Eingang/Ausgang: 4-20mA / 0-10V

Zu den Optionen

Schalldämpfer, Drosselschalldämfer u. Drosselplatten

Schalldämpfer, Drosselschalldämfer u. Drosselplatten
Schalldämpfer
Drosselschalldämpfer
Drosselplatten
Zu den Optionen

Getriebe mit Handrad HGC

Getriebe mit Handrad HGC

Die Getriebe HGC werden als Handbetätigung für Armaturen oder als Zwischenflanschgetriebe eingesetzt.

Sie sind sowohl einsetzbar für elektrische Schwenkantriebe der Baureihen AN40, AN100 u. AN300 als auch für pneumatische Schwenkantriebe der Baureihe PAG.

Zu den Optionen

Contact

AGS-Stellantriebe GmbH
Görlitzer Straße 2
33758 Schloß Holte-Stukenbrock
Deutschland