AGS Stellantriebe GmbH - Valves, actuators and control technology from Schloß Holte-Stukenbrock
HOTLINE: +49 (0) 5207 - 99384-0 Your partner for valves, actuators and control technology
 
Lift drives JMB

Lift drives JMB

  • Drehmoment: 500N pressure / 350N tension
  • Stellzeiten: 10mm/s
  • Stellwege: 50mm - 500mm
  • Spannungen: 230V AC
  • Data sheet

The linear actuators of the JMB series are a flexible solution for a wide range of applications. The shapely electric linear actuators housed in an aluminium casing are ideally suited for opening roof and multi-leaf dampers. In addition to this main application, the design of the actuator in conjunction with the accessories allows for a wide range of uses. The actuator is equipped with a relay for parallel operation.

The linear actuators are designed with a 230 VAC supply voltage. The drive is equipped with a maintenance-free spindle unit and is switched off in the end positions by limit switches.

The linear actuators of the JMB series are available in three types:

Type 0: no lamp indication provided
Type L: lamp indication possible in both end positions
Type LS: potential-free NC contact for lamp indication in each open position

In addition to the standard stroke lengths of 150mm, 300mm and 500mm, intermediate lengths are available on request. The actuators of the JMB series generally have a positioning speed of 10mm/s.

With the JMB series, positioning forces of 350N in tension and 500N in compression can be achieved as standard. Compressive forces up to max. 800N are possible on request.

Are you interested in or do you have questions about the linear actuators of the JMB series? We look forward to your enquiry and will be happy to advise you!


Optionen

Einbauteile

Einbauteile

Zus. potentialfreie Wegschalter
Schaltnocken
Potentiometer RP19, RP20 und MP21
Stellungsmelder MSA / ETA
Relais
Umgebungstemperatur

Zu den Optionen

Ansteuerungen

Ansteuerungen

Externe Geschwindigkeitsregelung BLDC-IO
Stellungsregler BLDC-R1

Zu den Optionen

Regelungen

Regelungen

Lastabschaltung LWS für Wechselstrom
Lastabschaltung LGS für Gleichstrom
Lastabschaltung LDS für Drehstrom
Stellungsregler RWS für Wechselstrom
Stellungsregler RGS für Gleichstrom
Notstellfunktion über Fail-Safe-Akku

Zu den Optionen

Contact

AGS-Stellantriebe GmbH
Görlitzer Straße 2
33758 Schloß Holte-Stukenbrock
Deutschland